We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Current Sensors.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Current Sensors(ul) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.

Current Sensors Product List

1～16 item / All 16 items

Displayed results
Magnetic Coreless Current Sensor "Currentier"

Magnetic Coreless Current Sensor "Currentier"

A low-heat current sensor that contributes to the miniaturization of substrates!

"Currentier" is a magnetic coreless current sensor IC equipped with a high-sensitivity Hall element. Despite being a coreless type, it achieves high precision comparable to that of closed-loop systems. Compared to conventional shunt methods, it has the following advantages: 1. The resistance value of the primary conductor is low at 0.27mΩ (which helps suppress heat generation), 2. The primary side does not require a power supply, allowing for a significant reduction in board size. Additionally, by offering a wide range of current options in the same package across the series, it enables the standardization of components and boards. 【Features】 - Capable of continuous high current operation (50/60/100A) - Creepage/clearance distance: ≧8mm (in compliance with UL61800-5-1) - Safety standards: UL1577 and IEC/UL62368-1 certified - Overall accuracy: ±0.4% F.S. (Ta=0~90℃ Typ.) *CZ370x series - Response time: 1μs Typ. *CZ370x series - Built-in disturbance magnetic field suppression function *For more details, please refer to the PDF documentation or feel free to contact us.

  • Other semiconductors
  • Sensors
  • Current Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High current compatible compact/thin current sensor "CZ375x series"

High current compatible compact/thin current sensor "CZ375x series"

Achieving miniaturization of EV charging stations and increasing output capacity! Coreless current sensor capable of detecting ±225A with surface mount.

The CZ375x is a magnetic coreless current sensor that incorporates Hall elements. By using high-sensitivity Hall elements, it can accurately measure a wide current range of ±115A to ±225A, which is difficult to achieve with typical coreless current sensors. Continuous current flow is also possible up to 100Arms. Therefore, it contributes to "increased output capacity." Additionally, compared to shunt resistors and core-type through-hole sensors, it can contribute to "miniaturization" and "reduction of manufacturing costs." ■ Miniaturization - Due to its small size and surface-mount package, it can be mounted on the back side of the circuit board. - The primary conductor has low resistance (0.27mΩ), which suppresses heat generation, allowing it to be placed in limited space on the circuit board. * It generates one-third the heat of other companies' coreless current sensors (based on our comparative test data). ■ Reduction of manufacturing costs It contributes to reduced manufacturing (assembly) costs by eliminating the need for wire connections to through holes. * For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Current Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Electronic Components] Current Sensor L32 Series ≪Rated Current 50–400A≫

[Electronic Components] Current Sensor L32 Series ≪Rated Current 50–400A≫

Low heat generation even at high frequency! Compact design and sulfur resistance make it an ideal current sensor for medium-capacity general-purpose inverters.

The Tamura Manufacturing Company's current sensor "L32 Series" is an ideal current sensor for medium-capacity general-purpose inverters, featuring a ferrite core that reduces high-frequency heating. There are through-type and busbar-compatible types available. 【Main Features】 ■ Compact design, single power supply +5V, with input/output reference function ■ Ferrite core reduces high-frequency heating ■ Six models in one series support rated currents from 50 to 400A ■ Busbar-compatible models available (50A, 100A) ■ Wide measurement range (saturation current 150 to 600A) ■ PCB mountable ■ Through part dimensions: □15×8mm

  • Other power sources
  • Current Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Electronic Components] Servo-type Current Sensor S29 Series ≪Supports 1000A≫

[Electronic Components] Servo-type Current Sensor S29 Series ≪Supports 1000A≫

Ideal for large UPS systems and renewable energy systems!! High-precision servo-type sensor compatible with large currents.

The Tamura Manufacturing Company's current sensor "S29 Series" is a high-performance current sensor with a magnetic balance method that supports large currents and features a multi-structure that can be mounted horizontally or vertically, offering excellent cost performance. It is ideal for large-capacity UPS systems and general-purpose inverters, rated for 1000A. 【Main Features】 ■ Ideal for large-capacity UPS systems and general-purpose inverters ■ Supports large currents, multi-structure that can be mounted horizontally or vertically ■ Maximum measurable current: 2100A (RL ≦ 4Ω), rated current: 1000A ■ Bolt-tightened secondary CN (3 types) S29S1T0D24Z : MOLEX/39-28-8040, Sn-plated S29S1T0D24ZM : MOLEX/38-00-6293, Sn-plated S29S1T0D24ZJ : JST/BH3P-VH-1, Sn-plated ■ Through-hole dimensions: φ38.5

  • Other power sources
  • Current Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Achieving high precision and high reliability in harsh environments" Current Sensor

"Achieving high precision and high reliability in harsh environments" Current Sensor

By adopting our proprietary circuit, we achieve high precision and high reliability in harsh environments!

■Features - Capable of detecting various types of currents such as AC, DC, and pulse - Detects current direction - Converts current values to voltage values for analog output - Complete electrical isolation between the measurement side and output side - Stable against temperature changes and voltage fluctuations - Reduces current noise due to shielding effects from a unique structure - Compact and lightweight - UL certified

  • Sensors
  • Current Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Clamp-type LoRaWAN Smart Current Transformer CT3xx Series

Clamp-type LoRaWAN Smart Current Transformer CT3xx Series

Calculates the cumulative ampere-hours per second and helps identify energy usage patterns for effective savings.

Features ■ Reports RMS current and cumulative current data on a per-minute basis ■ High-precision measurements with a maximum sampling frequency of 3.3kHz ■ Self-powered, requiring no batteries or external wiring ■ Real-time monitoring and rapid alarm response with sampling intervals of up to 1 second ■ Non-invasive clamp design allows for easy and safe installation without power interruption ■ Equipped with LED indicators to display operational status and alarms ■ Compatible with external wiring temperature sensors for cable temperature measurement ■ Achieves simultaneous detection of three phases with a wide detection range of 300A/500A/1000A ■ Compatible with standard LoRaWAN gateway and network server ■ Supports Milesight development platform ■ Supports wireless firmware updates (FUOTA) functionality

  • ct3xx-1.jpg
  • ct3xx-2.jpg
  • ct3xx-3.jpg
  • ct3xx-4.jpg
  • Transformers
  • Current Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Coreless Hall current sensor product "ACHL-724x"

Coreless Hall current sensor product "ACHL-724x"

It is designed for AC or DC current detection in industrial, commercial, and communication systems.

The 8mm surface-mount coreless hole current sensor product ACHL series is designed for AC or DC current detection in industrial, commercial, and communication systems. It features a copper conductive path near the surface of the internal IC die, equipped with an accurate, low-offset linear Hall circuit. The Hall sensor converts the magnetic field generated by the current flowing through this copper conductive path into a proportional voltage. The accuracy of the device is optimized by bringing the magnetic signal close to the Hall sensor. The precise proportional voltage is provided by a programmed accuracy and low-offset chopper-stabilized CMOS Hall IC after packaging. 【Features】 ■ Internal resistance of 0.6mΩ (typ) for low power loss ■ Maximum total output error of ±5.5% across all temperatures ■ The device's bandwidth is set via the FILTER pin. - 80 kHz (typ) bandwidth with 1nF ■ 8mm surface distance, stretch SO12 package ■ Compliance with international safety standards - UL/cUL, IEC/EN62368-1 insulation voltage: 5 kVrms, 1 minute *Please feel free to contact us for more details.

  • Sensors
  • Current Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Current sensor (CT) compatible with new JIS (half-wave measurement)

Current sensor (CT) compatible with new JIS (half-wave measurement)

We offer high-precision through-type/split-type current sensors (CT) and voltage detection transformers that enable current detection and voltage measurement in accordance with the new JIS standards.

■High-Precision Current Sensor - New type of through CT - Compatible with new JIS (half-wave measurement) - Uses thermosetting phenolic resin PM-9820, UL94V-0 - Low cost due to automatic pin insertion - Customizable ■Voltage Detection Transformer (Measurement Transformer VT) - Maintains creepage/clearance distance of 4.0mm. Withstands AC3000V. - Good linearity in low voltage range with minimal distortion. - Electrical characteristics stabilized by winding processing with ultra-fine wire in an aligned manner. - Uses heat-resistant phenolic bobbin to prevent bobbin deformation and terminal misalignment. - Adopts L-shaped pins that are resistant to shock and vibration. - Custom products can also be accommodated. ■Features - Current sensor (CT) compatible with new JIS (half-wave measurement) - High quality achieved through integrated production from injection molding to winding assembly at the Philippine factory - Proven track record in high-reliability environments such as communication infrastructure for small transformers used in communication equipment *For more details, please refer to the PDF document or feel free to contact us.*

  • transformer
  • Inductor Coil
  • Sensors
  • Current Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
LoRaWAN Smart Current Transformer CT10x Series

LoRaWAN Smart Current Transformer CT10x Series

Calculates the cumulative ampere-hours per second and helps identify energy usage patterns for effective savings.

Features ■ Self-powered ■ High-precision measurement with a maximum frequency of 3.3kHz ■ Real-time accumulated ampere-hour calculation ■ Non-invasive installation ■ Abnormal current state alert ■ External wire temperature sensor ■ Detachable and cable-free design ■ LoRaWAN wireless technology

  • 02.jpg
  • 03.jpg
  • 04.jpg
  • Transformers
  • Current Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Current sensor

Current sensor

Integrating busbars and sensors! We meet various needs with a wide range of products!

We offer a "current sensor" that supports high-precision current measurement and abnormal current detection. The features of this current sensor enable high-precision current detection using a shunt element. We have available the analog sensor "SBC-D300," which can measure large currents up to ±2,000, the high-precision digital sensor "DST-Module" with an insulated circuit, the high-precision non-contact sensor "USM contactless series," and the shunt busbar with a connector "C-Shunt," among others. Please feel free to consult us if you have any requests. 【Product Lineup】 ■SBC-D300 ■DST-Module (ACIL-C compliant) ■USM contactless series ■C-Shunt, etc. *For more details, please download the PDF or feel free to contact us.

  • Sensors
  • Sensors
  • Current Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[AMOGREENTECH] Current Sensor (Module) and others

[AMOGREENTECH] Current Sensor (Module) and others

Magnetic cores for automobiles and home appliances, current sensors

Current Sensor (Module) - A high-precision current sensor used for monitoring current and sensing position, distance, and speed in automotive systems. - Capable of precise and rapid customization development. EMI Filter (Module) A filter to prevent malfunctions caused by high-frequency noise generated in the high-voltage systems of EV vehicles.

  • Sensors
  • filter
  • Current Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
TMR (Tunnel Magnetoresistance) current sensor

TMR (Tunnel Magnetoresistance) current sensor

It is suitable for applications that require high precision, such as motor control and current detection!

The "TMR-type magnetic sensor" from MultiDimension Technology, which we handle, utilizes the tunnel magnetoresistance effect, offering higher sensitivity, higher precision, and lower noise compared to Hall elements. It has low temperature drift, low power consumption, and fast response capabilities. Its compact size makes it suitable for board mounting, and it is well-suited for applications requiring high precision, such as motor control and current detection. Please feel free to contact us if you have any inquiries. 【Features】 ■ High sensitivity and high precision ■ Low offset and low drift ■ Low power consumption ■ Wide bandwidth ■ Easy miniaturization *For more details, please refer to the related links or feel free to contact us.

  • Sensors
  • Current Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High current compatible compact/thin current sensor "CZ370x series"

High current compatible compact/thin current sensor "CZ370x series"

Realizing the miniaturization of EV charging stations and the increase in output capacity! Coreless current sensor capable of detecting ±180A with surface mounting.

The CZ370x is a magnetic coreless current sensor that incorporates Hall elements. Due to the use of high-sensitivity Hall elements, it can measure a wide range of currents that typical coreless current sensors cannot achieve. It can handle continuous currents of up to 60Arms and accurately detect currents up to ±180A. Therefore, it contributes to "increased output capacity." Additionally, compared to shunt resistors and core-type through-hole sensors, it can contribute to "miniaturization" and "reduction of manufacturing costs." ■ Miniaturization - Due to its small size and surface-mount package, it can be mounted on the back side of the circuit board. - The primary conductor has low resistance (0.27mΩ), which suppresses heat generation and allows placement in limited space on the circuit board. * It generates only 1/4 the heat of a shunt resistor (based on our comparative test data). ■ Reduction of manufacturing costs It can contribute to reduced manufacturing (assembly) costs by eliminating the need for wire connections to through holes. * For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Current Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-speed response compact/thin current sensor "CZ3Axx series"

High-speed response compact/thin current sensor "CZ3Axx series"

Contributing to the improvement of system safety! Coreless current sensor with built-in high-speed, high-precision overcurrent detection function.

CZ3Axx is a magnetic coreless current sensor with built-in Hall elements and overcurrent detection functionality. It achieves a high-speed response of 1μs and high precision of 0.3% F.S., enabling the detection of various fault modes such as ground faults and arm short circuits, contributing to improved system safety. Additionally, through its unique packaging technology, it realizes a low primary conductor resistance of "0.27mΩ" and high insulation with a creepage/clearance distance of ≧8mm. This significantly reduces heat generation during current application compared to shunt resistors, and eliminates the need for a primary side power supply or amplifier for insulation, allowing overcurrent detection with just the IC. Therefore, it can be placed in limited spaces on a circuit board. *For more details, please refer to the PDF document or feel free to contact us.

  • Sensors
  • Current Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Current Sensors

Related Categories of Current Sensors

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.